iki_sauna   iki_finlandiki englishiki swedeniki germaniki_russian
iki_homepage IKI Wood burning stoves electric sauna heaters iki_tent_sauna iki_contact iki_company
  Original IKI heaters Design IKI heaters Accessories Control units Instructions
design sauna heater
spacer
 

Instructions for electric sauna heaters

Before bathing for the first time heat up the heater once to burn off the protective oil solvents. Note that you need to air the sauna room efficiently afterwards.
The heating time is about 45–75 minutes depending on the size of the room and its ventilation.

Throwing water on the heater increases temperature and humidity. The top of the pillar creates more heat, while the sides create a gentler steam.
The temperature should be set by the temperature control in the control unit. A recommended temperature for IKI stone pillar is 50–70 degrees.

Maintenance Due to large variation in temperature, the sauna stones disintegrate in use. Pay attention especially to the gradual settling of the stones. Be sure that the heating elements do not appear with time. The stones settle most rapidly within two months of piling. Rearrange the stones at least once a year or even more often if the sauna is in frequent use. At the same time, remove any pieces of stones from the bottom of the heater and replace any disintegrated stones with new ones. By doing this, the heating capability of the heater stays optimal and the risk of overheating is avoided..

 

  Original Sauna heaters IKI Design sauna heaters Sauna control units
 
 

Model table | Pillar heaters

    Size of sauna Height of heater Diameter of heater Max. amount of stones  
  Pillar IKI 4,5 kW 3-6 m³ 120 cm 26 cm 80 kg  
  Pillar IKI 6 kW 5-9 m³ 140 cm 26 cm 100 kg  
  Pillar IKI 7,5 kW 7-12 m³ 105 cm 34 cm 140 kg  
  Pillar IKI 9 kW 8-16 m³ 120 cm 34 cm 150 kg  
  Pillar IKI 10 kW 10-18 m³ 125 cm 34 cm 170 kg  
  Pillar IKI 12 kW 14-24 m³ 140 cm 34 cm 180 kg  
  Pillar IKI 15 kW 16-26 m³ 125 cm 42 cm 250 kg  
  Pillar IKI 18 kW 18-28 m³ 140 cm 42 cm 280 kg  
  Pillar IKI 20 kW 18-32 m³ 130 cm 54 cm 380 kg  
  Pillar IKI 24 kW 22-36 m³ 145 cm 54 cm 420 kg  
  Pillar IKI 30 kW 26-44 m³ 125 cm 64 cm 500 kg  
             

Model table | Corner and Wall heaters

    Size of sauna Height of heater Radius Max. amount of stones  
  Corner IKI 6 kW 5-9 m³ 140 cm 30 cm 90 kg  
  Wall IKI 6 kW 5-9 m³ 140 cm 39/23 cm* 90 kg  
  Corner IKI 9 kW 8-16 m³ 130 cm 38 cm 140 kg  
  Wall IKI 9 kW 8-16 m³ 130 cm 47/27 cm* 140 kg  
             
*Width / Depth

Model table | Monolith heaters

    Size of sauna Height of heater Diameter of heater Max. amount of stones  
  Monolith 6,9 kW 7-12 m³ 132 cm 30 cm 120 kg  
  Monolith 9 kW 9-16 m³ 132 cm 30 cm 120 kg  
  Monolith 13,8 kW 15-25 m³ 132 cm 42 cm 220 kg  
  Monolith 15,9 kW 16-26 m³ 132 cm 42 cm 220 kg  
  Monolith 18 kW 18-28 m³ 132 cm 42 cm 220 kg  
 

Model table | IKI Pro heaters

    Size of sauna Height of heater Width /
depth
Max. amount of stones  
  IKI Pro 14 (13,8 kW) 15-25 m³ 79 cm 88 / 44 cm 240 kg  
  IKI Pro 21 (20,7 kW) 20-35 m³ 79 cm 88 / 44 cm 240 kg  
  IKI Pro 28 (27,6kW) 26-42 m³ 79 cm 88 / 51 cm 300 kg  
  IKI Pro 35 (34,5 kW) 35-50 m³ 79 cm 88 / 58 cm 360 kg  
             
 


 

 

Installation instructions Pillar heaters:

heater instructionsElectric Pillar IKI heaters with fixed control unit (4,5-10kW)

heater instructionsElectric heaters with separate control unit (4,5-12 kW)

heater instructionsElectric heaters with separate control unit (15-42 kW)

icon Installation instructions with Finlandia control unit (4,5-10 kW)

 

Installation instructions Corner and Wall heaters:

heater instructionsCorner and Wall IKI heaters with fixed control unit (6-9 kW)

heater instructionsCorner and Wall IKI heaters with separate control unit (6-9 kW)

 

Installation instructions Monolith heaters:

heater instructionsMonolith IKI heaters with separate control unit (6,9-18 kW)


Installation instructions Float heater:

heater instructionsFloat - Design Eero Aarnio (13,8 kW)


Installation instructions IKI Pro heaters:

heater instructionsIKI Pro electric heaters (13,8-34,5 kW)

 

Physical installation instructions:

heater instructionsPillar IKI 4,5-6 kW Finlandia control unit

heater instructionsPillar IKI 7,5-10 kW Finlandia control unit

heater instructionsPillar IKI 4,5-6 kW Wave control unit

heater instructionsPillar IKI 7,5-9 kW Wave control unit

heater instructionsPillar IKI 7,5-10 kW Pro-B2 control unit


heater instructionsPillar IKI 10 kW Wave control unit (2-phase)

heater instructionsPillar IKI 12 kW Wave control unit (2-phase)

heater instructionsPillar IKI 15 kW Wave control unit (2-phase)

heater instructionsPillar IKI 18 kW Wave control unit (2-phase)



heater instructionsPillar IKI 12 kW Pro-B2 control unit (2-phase)

heater instructionsPillar IKI 15 kW Pro-B2 control unit (2-phase)

heater instructionsPillar IKI 18 kW Pro-B2 control unit (2-phase)

heater instructionsPillar IKI 20 kW Pro-B2 control unit (2-phase)

heater instructionsPillar IKI 24 kW Pro-B2 control unit (2-phase)

heater instructionsPillar IKI 30 kW Pro-B2 control unit (2-phase)


heater instructionsMonolith 6,9 kW Wave control unit

heater instructionsMonolith 9 kW Wave control unit

heater instructionsMonolith 13,8 kW Wave control unit (2-phase)

heater instructionsMonolith 15,9 kW Wave control unit (2-phase)

heater instructionsMonolith 18 kW Wave control unit (2-phase)

heater instructionsMonolith 13,8 kW Pro-B2 control unit (2-phase)

heater instructionsMonolith 15,9 kW Pro-B2 control unit (2-phase)

heater instructionsMonolith 18 kW Pro-B2 control unit (2-phase)

heater instructionsIKI Pro 14 Pro-B2 control unit (2-phase)

heater instructionsIKI Pro 21 Pro-B2 control unit (2-phase)

heater instructionsIKI Pro 28 Pro-B2 control unit (2-phase)

heater instructionsIKI Pro 35 Pro-B2 control unit (3-phase)

 

 

 

 

 

 

iki_madeinfinland     ikifacebook iki_instagram iki_twitter iki_pinterest
Copyright © IKI-Kiuas Ltd.| Hakaniemenkatu 11, FI-00530 Helsinki, Finland | e-mail: ikikiuas@ikikiuas.fi